I believe that the 67% number for the 2020 election is of eligible voters and not registered voters. While turnout is low, it's not 25% low.
maxwellfire
Yeah openwrt should be great. It uses nftables as a firewall on a Linux distribution. You can configure it through a pretty nice ui, but you also have ssh access to configure everything directly if you want.
The challenge is going to be what the ISP router supports. If it supports bridge mode then things are easy. You just put your router downstream of it and pretend like it's a modem. Then you configure openwrt like it's the only router in the network. This is the opposite of what you've suggested, using the upstream ISP router in pass through and relying on the openwrt router to get the ipv6 GUA prefix. (You might even be able to get a larger prefix delegated if you set the settings to ask for it)
If you don't have bridge mode then things are harder. There's some helpful information here https://forum.openwrt.org/t/ipv6-only-slaac-dumb-aps/192059/19 even though the situation is slightly different since they also don't want a firewall. But you probably need to configure your upstream side on the openwrt router similarly.
Also looking more, the tplink ax55 isn't supported by openwrt. If you don't already have it, I'd get something that does. (Or if the default software on the ax55 supports what you want, that's fine too. I just like having the full control openwrt and similar gives)
I'd recommend something that you can put openwrt or opnsense/pfsense on. I think the tplink archers support openwrt at least.
The ISP router opening things at a port level instead of a host level is kinda insane. Do they only support port forwarding? Or when you open a port range can you actually send packets from the WAN to any LAN address at that port.
Can you just buy your own modem, and then also use your own router? (If the reason you need the ISP router is that it also acts as a modem).
Does the ISP router also provide your WiFi? If it does you should definitely go with a second router/access point and then disable the one on the ISP router.
Since games don't have to run with more than user privileges and steam runs in flatpak, you could run them as a different user account with very limited permissions.
That said, flatpak should be pretty secure as far as I'm aware if you make sure that permissions for the apps running are restricted appropriately. I'm not sure how restricted you can make steam and still have it work though
You can use offline mode for steam if you're okay with steam having internet but not games. But there's no way to use steam entirely offline. Internet access is a fundamental part of the system they have.
There's also a question of what your threat model is. Like are you trying to prevent causal access of your files by games, or like a sophisticated attempt to compromise the system conveyed through a game. For the former flatpak seems sufficient. For the latter you probably need a dedicated machine. And there's varying levels in between
Wait so the images in your post are the after images?
I think something that contributes to people talking past each other here is a difference in belief in how necessary/desirable revolution/overthrow of the U.S government is. Like many of the people who I've talked to online, who advocate not voting and are also highly engaged, believe in revolution as the necessary alternative. Which does make sense. It's hard to believe that the system is fundamentally genocidal and not worth working within (by voting for the lesser evil) without also believing that the solution is to overthrow that system.
And in that case, we're discussing the wrong thing. Like the question isn't whether you should vote or not . it's whether the system is worth preserving (and of course what do you do to change it. How much violence in a revolution is necessary/acceptable). Like if you believe it is worth preserving, then clearly you should vote. And if you believe it isn't, there's stronger case for not voting and instead working on a revolution.
Does anyone here believe that revolution isn't necessary and also that voting for the lesser isn't necessary?
The opposite is more plausible to me: believing in the necessity of revolution while also voting
Personally I believe that revolution or its attempt is unlikely to effective and voting+activism is more effective, and also requires agreement from fewer people in order to progress on its goals. Tragically, this likely means that thousands more people will be murdered, but I don't know what can actually be effective at stopping that.
Cool!
I wouldn't worry about making a second post. We can use all the content that we can get and this is neat
I understand that you have principles. I have principles too. But it sounds like your principles are at least partly based on a personal purity, which is what I'm arguing against.
The idea that by voting for kamala, you'll be personally tainted by her actions. And that by not voting at all, you avoid this taint.
There's a good argument in my opinion for not voting if you actually believe it will lead to the best outcome. Like for example that if enough people don't vote it will cause our leader/parties/etc to do something better. I just don't think this is true. And if it's not true, what remains is a purity argument, which I find selfish, since it prioritizes your internal view of yourself over what happens to other people in the world.
I'm also absolutely in favor of third party candidates that push issues and the electorate to the left. I just think that generally they should drop out at the point when it becomes clear that they aren't going to win and endorse the person closest to them on the issues.
Docker desktop is not what most people on Linux are using. They're using docker engine directly, which doesn't run in a vm, and doesn't require virtualization if you use the same kernel inside the containers.
Beautiful
I don't know a lot about tailscale, but I think that's likely not relevant to what's possible (but maybe relevant to how to accomplish it).
It sounds like the main issue here is dns. If you wanted to/were okay with just IP based connections, then you could assign each service to a different port on Bob's box, and then have nginx point those ports at the relevant services. This should be very easy to do with a raw nginx config. I could write one for you if you wanted. It's pretty easy if you're not dealing with https/certificates (in which case this method won't work anyway).
Looking quickly on google for npm (which I've never used), this might require adding the ports to the docker config and then using that port in npn (Like here). This is likely the simplest solution.
If you want hostnames/https, then you need some sort of DNS. This is a bit harder. You can take over their router like you suggested. You could use public DNS that points at a private IP (this is the only way I'm suggesting to get public trusted ssl certificates).
You might be able to use mdns to get local DNS at Bob's house automatically, which would be very clean. You'd basically register like
jellyseer.local
andjellyfin.local
on Bob's network from the box and then setup the proxy manager to proxy based on those domains. You might be able to just doavahi-publish -a -R jellyseer.local 192.168.box.ip
and thenavahi-publish -a -R jellyfin.local 192.168.box.ip
. And then any client that supports mdns/avahi will be able to find the service at that host. You can then register those names nginx/npn and I think things should just workTo answer your questions directly
I'd be happy to try and give more specifics if you choose a path similar to one of the above things.