[-] TweetyDaBird@lemmy.world 1 points 7 months ago

Try the Lotus 58. You get a bit more options over all.

8

For the those interested in a budget oriented, easily DIY built, 60% keyboard with USB C instead of the ‘standard’ TRRS cable.

New version fits existing plates (and 3D Designs) and have the same options for OLED & Encoders as before. Sandwich case plates are available in black & white, both with optional ears to tent/tilt.

Shop

[-] TweetyDaBird@lemmy.world 1 points 1 year ago

No, this is not asshole design. If the oil port was sticking further out, it’s gets knocked off if you lay the bike down. And then you have no oil at all, and a blown up motor.

It’s by good design the oil port is recessed. Yes it’s annoying to use a funnel, but it’s the preferable option.

[-] TweetyDaBird@lemmy.world 2 points 1 year ago

Well the problem with that is when you lay the bike down, the oil port gets shaved off and you lose all your oil. Don’t ask me how I know.

So yeah, it’s a PITA to use a funnel, but it’s still the preferable option.

[-] TweetyDaBird@lemmy.world 1 points 1 year ago

What am I missing, how is this done?

[-] TweetyDaBird@lemmy.world 2 points 1 year ago

Lemmy.world was having mayor issues today, so not surprising if something broke.

1
submitted 1 year ago* (last edited 1 year ago) by TweetyDaBird@lemmy.world to c/mechanicalkeyboards@lemmy.ml

Common core functionality:

  • Hot-swap 4x12 Ortho
  • RP2040, 4 MB flash
  • USB type C
  • Full per key RGB
  • Optional encoders on all four corners
  • Optional 1x2u & 2x2u layout

Option 1:

  • North-facing keys
  • Fits existing JJ40/BM40 cases

Option 2:

  • South-facing keys
  • Needs dedicated case design (possibly USB daughterboard)

Option 3:

  • South-facing keys, compromise on the two top row keys by the USB connector.
  • Fits existing JJ40/BM40 cases
[-] TweetyDaBird@lemmy.world 1 points 1 year ago

Actually, I prefer liftoff

0
submitted 1 year ago* (last edited 1 year ago) by TweetyDaBird@lemmy.world to c/ergomechkeyboards@lemmy.world

Having always been somewhat annoyed I can't simply place a Pro Micro (or for that matter any other controller) over on top of a hot-swap socket without either turning it sideways, loosing pins, or some other creative solution.

So after trying to find other smaller controllers, but always ending up with a compromise, I finally got fed up with it, and started designing one of my own that is just large enough to fit the purpose.

RP2040 powered of course, and with a mid mount USB type C, the design is extremely low profile and fairly barebones with no status LED, no buttons, etc. making it easy and cheap to produce. And with 26 pin, there are 23 IO pins available for matrix and other things. VBUS detection for easy use with split keyboards, but beyond that stripped of anything fancy.

The boot/reset signals are available as castellated connections next to the USB, and only really meant for the first flashing/emergency flashing, as the rest would be handled by tapping a keycode to enter bootloader from within QMK/ZMK.

Edit: Added D+/- as jumpered breakouts on pins, se below. Also added a pin high/low for assigning sides on a split (useful for handwiring)

[-] TweetyDaBird@lemmy.world 5 points 1 year ago* (last edited 1 year ago)

That’s not he projected range shown on the display. That’s the actual range the battery will give you.

They temporarily removed a bit of the safety margin built in to reduce battery wear, allowing people to get out of harms way without a stop to charge if they were on the limit. But only for people moving away from The affected area, etc. so smart and helpful.

TweetyDaBird

joined 1 year ago