homelab

6589 readers

8 users here now

founded 4 years ago

MODERATORS

CMonster@lemmy.ml

[SOLVED] TFTP error: "Only absolute filenames allowed" (sh.itjust.works)

submitted 10 months ago* (last edited 10 months ago) by Kalcifer@sh.itjust.works to c/homelab@lemmy.ml

6 comments fedilink hide all child comments

Workaround

I'm not sure what was going wrong with what I was doing initially, but, thanks to @tapdattl@lemmy.world, as suggested, I disabled the tftp server system service, and, instead, started it with the following command:

sudo in.tftpd -L /srv/tftp --verbose --permissive -s

and it then flashed successfully.

Original Post

cross-posted from: https://sh.itjust.works/post/11735447

I'm trying to flash firmware to a router (Archer C7) using TFTP, but, when the router makes the request for the firmware file over TFTP, the TFTP server responds with the following error
Error code: Access violation (2)
Error message: Only absolute filenames allowed

This is the config for tftpd in /etc/conf.d/tftpd:
TFTP_OPTIONS="-s"
TFTP_DIRECTORY="/srv/tftp"
TFTP_USERNAME="tftp"
TFTP_ADDRESS="192.168.0.66:69"
I have the firmware file in /srv/tftp, and both the firmware file, and /srv/tftp have chmod 777 permissions.

The TFTP server is running on Archlinux, and is installed as tftp-hpa from the arch repos.

If I test as a client, I can get it to download if I specify the full (absolute) path to the file /srv/tftp/filename, so it seems that the config isn't pointing the server to /srv/tftp as the relative path... How would I go about fixing that?

you are viewing a single comment's thread
view the rest of the comments

[–] mfigueiredo@lemmy.world 0 points 10 months ago (1 children)

The issue is caused because the tftpd-hpa --secure flag is not being used

TFTP_OPTIONS="-s"

[–] Kalcifer@sh.itjust.works 2 points 10 months ago

As shown in my post, I have that in my config. I have tried it with both -s, and --secure.