Sounds like it may be time to consider threadripper, combined with an Intel arc/battlemage GPU, if you want more pcie lanes and quicksync
this post was submitted on 19 Dec 2024
21 points (92.0% liked)
homelab
6703 readers
12 users here now
founded 4 years ago
MODERATORS
I think this is where I'm headed. Is there anything to consider with Threadripper vs Epyc? I'm seeing lots of CPU/MOBO/RAM combo's on ebay for 2nd gen Epyc's. Many posts on reddit confirming the legitimacy of particular sellers, plus paypal buy protections have me tempted.
I think the 3rd Gen epic and threadripper were the first ones with pcie gen4. You might want to look at something a little newer if you're wanting to get 10 years out of it. I'm personally looking at trx50 and a 7960x, but still saving up for that $1300 processor
The options I’m looking at have PCIe 4 and seem to be gen 2? Epyc 7282 or 7302.
I didn't realize that, and it looks like you're right, that could be a good deal
Mine's got all the slots filled and I think I still have spare PCIe lanes, Threadrippers are nuts.
iGPU is just integrated GPU on the CPU die. That is going to use pcie lanes for communication.
Wiring up a iGPU, as a cpu architect, you have two options:
- direct interconnects (low latency, no space, no extra heat)
- MUXed interconnects (latency, complexity, space, and heat on die), but even then you would have to choose between using the iGPU and having external PCIe lanes anyway
I think most designers have gone with direct interconnects
Sounds like your real requirement is just more pcie lanes, I believe epyc chips will provide in abundance
https://www.amd.com/en/products/processors/chipsets/am5.html
You can look at pci-e lanes available by model here.
Also you can use newegg to search moterboards by usable pci-e lanes.
Thanks. I'll be the first to admit a lack of knowledge with respect to CPU architecture - very interesting. I think you've answered my question - I can't have QuickSync AND lanes.
Given I can't have both, I suppose the question pivots to a comparison of performance-per-watt and number of simultaneous streams of an iGPU with QuickSync vs. a discrete GPU (likely either nVidia or Intel ARC), considering a dGPU will increase power usage by 200W+ under load (27c/kWh here). Strong chance I am mistaken though, and have misunderstood QuickSync's impressive capabilities. I will keep reading.
I think the additional lanes are of greater value for future proofing. I can just lean on CPU without HWaccel. Thanks again!
If power consumption is an issue then I'd recommend the arc a310 which can only draw up to 30 watts. I've been using one for a while and it can easily handle several 4k streams without issue.
Thanks. This is a pretty compelling option. I hadn’t looked at the entry level arc, but when it comes to encode/decode it seems all the tiers are similar. 30W is okay, and it’s not a hard limit or anything, just nice to keep bills down!
Have you considered AMD? The 70 class boards basically have an extra I/O die as the chipset on the board. I have this board with a 7700x which is way overkill. I put an A380 in the bottom slot for frigate and Plex, but honestly the amd igpu handles Plex just fine. I never tried frigate with the igpu.
https://pg.asrock.com/mb/AMD/X670E%20PG%20Lightning/index.asp#Specification
x16@5.0
x16@4.0
x1@4.0
x1@4.0, full 16 slot
E-key for coral
M-key gen5x4
M-key gen3x4
M-key gen4x2
M-key gen4x4
4 x SATA3
I hadn’t considered AMD, really only due to the high praise I’m seeing around the web for QuickSync, and AMD falling behind both Intel and nvidia in hwaccel. Certainly will consider if there’s not a viable option with QS anyway.
And you’re right, the south bridge provides additional PCIe connectivity (AMD and Intel), but bandwidth has to be considered. Connecting a HBA (x8), 2x m.2 SSD (x8), and 10Gb NIC (x8) over the same x4 link for something like a TrueNAS VM (ignoring other VM IO requirements), you’re going to be hitting the NIC and HBA and/or SSD (think ZFS cache/logging) at max simultaneously, saturating the link resulting in a significant bottleneck, no?
You could always add an Intel GPU in a PCIe slot, if you're going for that kind of high end build.
Alternatively if you run an Intel iGPU you don't need a Coral TPU either, as Frigate can use OpenVINO and it works as good as the Coral or better anyways.
Also if the LSI HBA is connecting to HDDs, it won't need very much bandwidth so I'm not sure if the lane restriction there would matter?
The chipset link is 4x4.0 and daisy chained so 8GB per second. My use case is way more casual than you're looking for.
I think what's your up against is Intel locking features behind a paywall, like they have with desktop ECC and hyper threading thru the years.
Thanks, I'll need to have a look at how the chipset link works, and how the southbridge combines incoming PCIe lanes to reduce the number of connections from 24 in my example, to the 4 available. Despite this though, and considering these devices are typically PCIe 3.0, operating at the maximum spec, they could swamp the link with 3x the data it has bandwidth for (24x3.0 is 23.64GB/s, vs 4x4.0 being 7.88GB/s).