I've had that happen with one of those exact same cards and it was a bad card, could be your issue too.
this post was submitted on 16 Dec 2024
31 points (100.0% liked)
Linux
48665 readers
995 users here now
From Wikipedia, the free encyclopedia
Linux is a family of open source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991 by Linus Torvalds. Linux is typically packaged in a Linux distribution (or distro for short).
Distributions include the Linux kernel and supporting system software and libraries, many of which are provided by the GNU Project. Many Linux distributions use the word "Linux" in their name, but the Free Software Foundation uses the name GNU/Linux to emphasize the importance of GNU software, causing some controversy.
Rules
- Posts must be relevant to operating systems running the Linux kernel. GNU/Linux or otherwise.
- No misinformation
- No NSFW content
- No hate speech, bigotry, etc
Related Communities
Community icon by Alpár-Etele Méder, licensed under CC BY 3.0
founded 5 years ago
MODERATORS
My built-in SD card reader shows up in lspci as an "SD Host Controller". Since lspci and lsusb should list everything that's connected, it should show up there. If it's not there, it is not connected, or idk, it's broken maybe. Or it's not listed with a name, just a number. I think the names come from some database of known devices. Maybe your SD card reader is a unicorn and nobody has ever seen it before and so it's not in the database.
Does your SD card reader itself show up in lsusb? Does anything extra show up in /dev when plugging it in? It may be that there's no partitions on the drive, so you don't see any storage. Could also be either your reader or card not working, however. It would help to get another reader or card to test if your reader or card work.
If the card reader is built in, it may show up as /dev/mmcblk0.
Thanks for your answer. It is built in, but that does not exist in my file system.
The reader may need a kernel module loaded. I have an old laptop with a built in Realtek PCIe card reader that requires the rtsx_pci_sdmmc module to be manually loaded.
If it is a PCIe card reader, it should have shown up in lspci even without the module loaded though.
Have you checked the BIOS settings to make sure it hasn't been disabled there?
Thanks for the reply. It does not show up in lsusb as far as I can tell. Unplugging and pluging back in shows no difference in output. I will have to maybe test it in another machine. I'll ask about. Thanks for your time
Does anything show up in dmesg when you plug in the adaptor?
I read that you don't have another adaptor or computer for debugging, but it's equally sad that it's most probably the best result you can get, knowing or not knowing what the root cause is. You literally need to test another adaptor, try another SD card, try a different USB port. Basically throw everything at the wall and see what sticks. It would work without technical knowledge eventually.
Ive had similar issues on both windows and Linux, seems to be a hardware thing:
For some microSD adapters you specifically have to plug the SD card into the adapter before the adapter is plugged into the computer. I assume its something about the computer only registering a "new device" when the USB is plugged in.
In your shoes: I would run journalctl -f and then try plugging in your adapter and watch the logs scroll as you do it to catch for errors, failures, timeouts, or even if it detected anything at all .
Does the device show up if you open Gparted? Maybe it needs to be formatted. Though I guess it'd still show up with 'lsusb' even if it needed formatting.
Thanks for the answer. No, nothing in Gparted, or Disks. Nothing in lsusb either.
gnome-disks doesn't see it?! that's not good.