this post was submitted on 15 Oct 2024
104 points (98.1% liked)

Bicycles

3121 readers
68 users here now

Welcome to !bicycles@lemmy.ca

A place to share our love of all things with two wheels and pedals. This is an inclusive, non-judgemental community. All types of cyclists are accepted here; whether you're a commuter, a roadie, a MTB enthusiast, a fixie freak, a crusty xbiking hoarder, in the middle of an epic across-the-world bicycle tour, or any other type of cyclist!


Community Rules


Other cycling-related communities

founded 1 year ago
MODERATORS
 

I wanted to share my experience with waxing my bike chains.

I was resistant to waxing my chains because it seems that a lot of people felt it was "too much work".

But having to constantly clean black shit off my chains after every ride, then spend time degreasing and re-lubing, I figured I'd try waxing when I got my gravel bike.

Now, thousands of KM later and having converted all three bikes to waxed, there's no way I'd go back. The time saved could be measured in hours per month.

First, the biggest complaint is chain prep. Yeah, regardless if you're waxing or not, you'll need to prep a new chain by removing the factory grease. With waxed, you do this once, and no more worrying about degreasing ever again. Make like easy and get Silca's chain stripper, and it's a 10 minute, one-step process.

Ongoing chain maintenance couldn't be easier. After every ride, give the chain a quick wipe (or not). My chain stays clean, even after a 200 km ride.

And if you ride in wet or dirty conditions? Guess what, you're in for a LOT of work if you lube your chain. With waxed, keep a second (or third) chain ready to go, and you just swap it out (10 seconds of effort). Take the dirty chain, give it a wipe if it's only been wet, or pour boiled water onto it if you want to "reset" the chain to bare metal. Then drop it into the waxing pot for a re-wax. You don't have to stand at the pot, so there's no real time commitment here. I've spent more time completely dirtying large microfiber cloths trying to get my chain "clean" when lubed (hint: it's never clean if you use a wet lube, not without solvents and an ultrasonic cleaner).

For actual immersion wax, I do it every 1000 km (sooner than you need to), and use a drip wax every 200 - 250 km to keep things fresh.

Honestly, wax is easier, cleaner, and takes less time to maintain vs wet lube.

The only downsides? The initial cost to get started. But this is offset by not having to replace chains or other components prematurely. You actually save money in the long-term when using waxed chains.

Some might argue that "you can't run waxed chains in muddy or constantly rainy conditions". Well, at the same time, your wet lube isn't really helping matters in those situations, either. Waxed is still better, and you can swap chains much faster than you can clean the grinding paste from a wet lubed chain.

Who would I not recommend waxed chains to? Someone who rarely uses their bike. Drip lube will be "good enough" in those cases. But anyone else would benefit from waxing their chain.

(page 2) 32 comments
sorted by: hot top controversial new old
[–] thatsnothowyoudoit@lemmy.ca 2 points 1 month ago (1 children)

Started with wet wax five years ago. Two years ago migrated to immersion waxing.

I do 5-10 chains at a time. It takes all of 15 minutes.

Then I wet wax between immersion waxing sessions.

Chains last a wildly long time and the time saved in between rides is incredible. Not to mention how clean all other parts stay.

[–] Showroom7561@lemmy.ca 1 points 1 month ago (4 children)

I do 5-10 chains at a time.

For how many bikes??

load more comments (4 replies)
[–] DarkThoughts@fedia.io 1 points 1 month ago (2 children)

In my experience a lot of people are simply not aware of liquid chain wax like Squirt and think they have to put their chain in a heated pot or something.

[–] Showroom7561@lemmy.ca 2 points 1 month ago (1 children)

Drip wax is better than wet lube, but not as good as immersion wax. You CAN use drip wax over a chain that has been immersion waxed for ongoing top-ups, but it also depends on what works for you.

I use the site zerofrictioncycling to see which methods are best.

[–] DarkThoughts@fedia.io 1 points 1 month ago (1 children)

Yeah but I'm lazy and imo it is good enough, especially with how easy it is to apply. I know a lot of people think similarly about that process, except they don't know that there's an easy waxing way too and it is still superior to regular lubes.

[–] Showroom7561@lemmy.ca 1 points 1 month ago

Yeah but I’m lazy and imo it is good enough, especially with how easy it is to apply.

For sure. You're already getting better, cleaner results than pretty much any wet lube out there - even the best stuff!

[–] ghashul@feddit.dk 1 points 1 month ago

This is what I've been using for the last 12 years, and I've been happy. Immersion waxing seems interesting, but it does seem a bit daunting to me.

[–] ContrarianTrail@lemm.ee 1 points 1 month ago

My chain maintenance takes about 2 minutes: soak it with some cheap multipurpose oil and wipe off the excess with an oily rag. I repeat this once every 2 weeks or so and it has worked good enough so far. When it's extra wet outside and my bike is covered in mud when I get back home I usually go thru it with an garden sprayer filled with hot water. Then I add the extra step of drying the chain with compressed air and re-lube it for storage after every ride.

[–] LukaszH@szmer.info 0 points 1 month ago (1 children)

The time saved could be measured in hours per month.

Huh? I have two bikes I ride all year round – snow, rain, sun, on and off-road. Both of them pretty well maintained, if I say so myself. I've ridden over 5.5k km this year, and I think I've spent less than an hour total on cleaning and lubing my chains.

Make like easy and get Silca’s chain stripper, and it’s a 10 minute, one-step process.

10 minutes to degrease your chain with some fancy (and expensive, I presume) stripper? Damn, nobody's got time and money for that. You can do that in less than two minutes of work, including taking the chain off and putting in back. Just put your dirty chain in a small plastic bottle with some gasoline and shake it well for a minute. After that, run it through a piece of cloth and hang outside to dry. Done.

Honestly, wax is easier, cleaner, and takes less time to maintain vs wet lube.

Yeah, sure. Not having to cook my chains every 1k km takes sooo much time xD

[–] Showroom7561@lemmy.ca 2 points 1 month ago

and I think I've spent less than an hour total on cleaning and lubing my chains.

Then you aren't really cleaning them. The pins in your chain can't be wiped clean from the outside. If you ride and wipe down the chain, it's not clean.

10 minutes to degrease your chain with some fancy (and expensive, I presume) stripper? Damn, nobody's got time and money for that.

For clarity, that's done once with a new chain. And it's a much safer product than solvents, which can be reused for years.

Just put your dirty chain in a small plastic bottle with some gasoline and shake it well for a minute.

You aren't getting it clean if that's how you do it. The grit isn't being removed as well as you think. You can try that with an ultrasonic cleaner, but a used chain with need multiple baths, even with an ultrasonic cleaner.

After that, run it through a piece of cloth and hang outside to dry.

In below zero temps, this isn't an option. And I'd prefer not to use gasoline in my home, either.

You do what works for you. I find waxing to be a far better process, but maybe you're needs are different from mine.

load more comments
view more: ‹ prev next ›