If the scanner was working fine with the Pi before, I would suspect the USB cable or power supply. Try a different power supply and cables. The Raspberry Pi 3B+ can supply 1.2 amps from its USB ports which is sufficient for 2 bus powered devices. A powered USB hub can be used if you need to connect more bus powered devices to the Pi.
this post was submitted on 22 Mar 2024
6 points (87.5% liked)
Self Hosted - Self-hosting your services.
11498 readers
1 users here now
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don't control.
Rules
- No harassment
- crossposts from c/Open Source & c/docker & related may be allowed, depending on context
- Video Promoting is allowed if is within the topic.
- No spamming.
- Stay friendly.
- Follow the lemmy.ml instance rules.
- Tag your post. (Read under)
Important
Beginning of January 1st 2024 this rule WILL be enforced. Posts that are not tagged will be warned and if not fixed within 24h then removed!
- Lemmy doesn't have tags yet, so mark it with [Question], [Help], [Project], [Other], [Promoting] or other you may think is appropriate.
Cross-posting
- !everything_git@lemmy.ml is allowed!
- !docker@lemmy.ml is allowed!
- !portainer@lemmy.ml is allowed!
- !fediverse@lemmy.ml is allowed if topic has to do with selfhosting.
- !selfhosted@lemmy.ml is allowed!
If you see a rule-breaker please DM the mods!
founded 3 years ago
MODERATORS
You were right. It was the bloody usb cable powering the pi. I had switched that to a shorter one for less cable, but switching back it works again. Thank you
Out of curiosity, how did you solve that software wise? I was planning to do the same thing with my old MFP. Are you just using CUPS and SANE?
Using cups for the printer and a sane web ui (scanservjs) for the scanner
I'll look into that, thank you!
Probably also check the power settings in the config file: https://kalitut.com/increase-usb-current-limit-raspberry-pi/