Ask Lemmy

this applies for boarding/riding on public transit (bus, subway).

I agree with you in general, but in my industry, there are still lots of companies that buck this trend. Employers that pay competitively but have shitty toxic environments, and scrappy startups where the pay sucks but the vibe is great.

Still, the advice to not think of it as a trade-off intrinsic to companies is solid. You deserve good vibes and good pay from the same job.

With jobs, maybe. With careers, especially in STEM, you get lots of exceptions like extremely rewarding but low paying positions in academia, and tech companies that think they can just spend money instead of effort to fix their culture and broken hiring process.

I would like to propose a modification. Drive "actively and predictably."

Be aggressive when needed, like merging. Be defensive when needed, like in traffic. Be predictable when needed, like following right of way when turning.

Do what is needed to be safe and efficient, while also doing what other drivers would expect you to do.

As many accidents come from people stopping on entrance ramps, not taking the left turn to let someone out, or not paying attention as anything else.

It's true, Everybody's free to wear sunscreen

additionally, have fire alarms and change the batteries when they are low. If you have gas heating, get yourself a good carbon monoxide detector as well!

I was going to buy one so I called my local fire station for advice and the advice they gave me was - make sure your fire alarms and smoke detectors are working, and if you have a fire, call 999 and evacuate.

I questioned if it wasn't better to have an extinguisher to try and get it under control, and he explained that most people have generally never used an extinguisher before (or would even know which to use for what fire), and even if they have, not in a real life panic inducing situation, and so are more likely to be wasting valuable time and putting themselves at risk, than actually put out the fire.

I'm sure this won't stop some people, but it was enough for me (he was right, I was calling for advice because I didn't have a clue, and for every person like me who asks, how many don't, and end up in situations like those I presume lead to him giving me that advice?).

I initially didn't recall the "fact or piece of information" in the post title and thought, "well this is a weird tip ..."

Make sure you buy the correct type of plunger.

Cup plungers are meant for sinks.

Flange plungers are meant for toilets.

What if im trying to murder someone via a rube goldberg style contraption and easy-to-tip-over furniture is my coup de grace? edit: golberg -> goldberg

Is it wrong to want to see an image of that out of morbid curiosity

I mean, how does that even work

But also I'm going to need a source for that just incase its bullshit

Or even better, have you cat neutered before she get´s into heat. Provided your cat is not suffering from liver problems and can tolerate anaesthesia of course. Being in heat regularly without breeding is not only unnecessary stress for your cat and yourself but also promotes cancer of her reproductive organs.

That includes NVMe.... Just spent two weeks troubleshooting a constant random reboot on my newly built pc.... It ended up being the m.2 port on the motherboard that was faulty, not even the drive itself. I've been building computers personally and professionally for over 20 years and that was a first for me. Everyone I talked to and every support forum insisted RAM or power supply were the problem but nope! Not this time!

But the lesson here is, if you have a recurring problem that has no obvious cause... Test EVERYTHING. Start with the common stuff that fails and work your way down: Power Supply -> RAM -> CPU -> GPU -> HDDs -> SSDs -> USBs

Tips for RAM: It's usually best to first boot into a ram testing tool like memtest86 and just let that do its thing. That alone is usually all you need to know if you have a memory issue. Sometimes though, results may not make sense, I've seen situations where a new stick of RAM fails at almost every block and it turned out to be the slots on the motherboard that were faulty. In that case if results seem a little fishy you can remove all but one stick of RAM in the first slot, run another test, then move that stick of RAM down to the next slot. Repeat until all slots have been tested, you can also be extra thorough if needed and repeat the same test with the other sticks of RAM. That usually helps rule out if it's a motherboard issue or an issue on the stick of RAM.

CPU/GPU: usually any old stress test will make any hardware issues apparent with these two.

SSDs: these can be a little tricky to test especially if you are booting from them but in my case I found that completely removing the NVMe drive solved all my problems (well a mobo rma was the real fix). I couldn't even boot into a live Linux USB without crashing and rebooting when my NVMe was plugged in. One not so obvious clue that the SSD was acting up was that event logs related to the crash were never written to the drive... Because I/O was outright failing.

USBs: yes, USBs are on that list. One of my first significant computer issues that I had ever encountered occurred from a faulty USB hub that stopped my PC from even booting up. I took it to two different repair shops they all told me nothing was wrong with my computer, but every time I brought it back home and plugged everything back in... I couldn't boot. It was a lucky chance that I figured out it was the USB hub, that was not a fun one.

Now I didn't even add motherboards to the list because quite frankly I'm not sure how they rank but they are the absolute worst piece of hardware to troubleshoot but luckily it's usually pretty rare that they fail. There are so many connections and settings built into motherboards that it quickly gets overwhelming trying to troubleshoot anything related to it. From my experience, if you have individually tested every bit of hardware and everything passes its test, most often it's the motherboard that's failing, especially if you have already ruled out software/firmware issues for sure. Motherboard issues aren't always obvious and can often fail in very bizarre ways.

And as a final bit of advice I'd like to throw out there from my years of experience in PC building.... NEVER CHEAP OUT ON A POWER SUPPLY. It affects every single component in your PC and when they fail it can get ugly. I bought a super cheap off-brand power supply one time and pushed that thing to the absolute limits and when it failed it took down more than half of my PC with it, fried my motherboard, CPU, and RAM. Additionally, the risk of fire is not zero when these things fail. Always use ONLY the cables provided for that power supply and nothing else. Those cables are rated specifically for the wattage that can be supplied by that power supply. Also, it's good to get a power supply that's roughly 100+ watts more than what your PC needs. This helps in maximizing the efficiency of the power supply as well as increasing longevity due to less thermal wear.

It's nice to be nice

• Mister Rogers

words I've always lived by

Gender can change (...), sex cannot.

That statement got me a lifetime ban on reddit, justification: transphobia

And a ton of flavor